• To maximize the benefits of a lighting management system, use Eco-10 dimming ballasts by Lutron. Eco-10 offers 100% to 10% dimming and is suited for use when saving energy with an economical initial cost is the primary goal, and critical performance is secondary.

  Eco-10 ballasts are available for a large range of lamps, making them a good choice for applications with many different fixture types. Eco-10 ballasts are compatible with Lutron's complete line of 3-wire fluorescent controls.

• Components

Return to Top

• The choice for economical workplace dimming down to 10%

• Excellent for both new construction and existing applications
• Works seamlessly with RadioTouch, Spacer System, and other Lutron lighting controls for lighting control and energy management capabilities
• Low-profile ballast size allows individual control with many fixture types

• Eco-10 for T5HE and T5HO Lamps

• Slim profile -- just 1" high
• 3-wire line voltage control
• End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life cycle
• Color-keyed push-in connectors

• Eco-10 for T8 and U-bent Lamps

• Slim profile case available
• 3-wire line voltage control
• Color-keyed push-in connectors on case type D

• Performance

Return to Top

• Continuous, flicker-free dimming from 100% to 10%
• 3-wire line voltage control for consistent fixture-to-fixture dimming
• Lamps turn on at any dimmed level without flashing to full brightness
• Low harmonic distortion
• Slim-profile design
• 100% performance tested
• Ultra-quiet operation
• 5-year warranty (limited) with field service commissioning (3-year warranty standard)

• Specifications

Return to Top

• Lighting management dimming from 100% to 10% relative light output
• No visible flicker
• Total Harmonic Distortion (THD) less than 20%
• Power factor greater than .95
• Ballast factor greater than .85 for T8 lamps and T5 twin-tube lamps
• Ballast factor equal to 1.0 for T5 and T5-HO lamps
• Frequency of operation greater than 25 kHz for T8 lamps and T5 twin-tube lamps
• Frequency of operation greater than 42 kHz for T5 and T5-HO lamps
• Inaudible in 27 dBA ambient environment
• Inrush current limiting circuitry built-in (maximum of 7 amps for 120V and 3 amps at 277v)
• Internal fusing
• Minimum lamp starting temperature 10°C (50°F)
• Maximum ballast case temperature 75°C (167°F)
• Click here to download 120 & 277 volt Eco-10 specifications (PDF)
• Click here to download 220/240 volt Eco-10 specifications (PDF)