Sivoia QS

Installation options for Lutron roller shades

 
 

Angled Coupler
Economically address curved facades with the angled coupler from Lutron. This coupler removes the need for multiple shade drives in angled applications — resulting in significant cost reductions.

Shade angles not required to order; one size fits all angles, 0°-15° or 0°-45°. The 0°-15° model creates smaller light gaps, while the 0°-45° offers a wider range of installation angles.

Performance
  • Operates up to three (3) coupled fabric panels using one (1) roller 100, roller 150 or roller 200CW drive
  • Allows for angles up to 45° between coupled shades
    (22.5° maximum each side)
  • Maintains precise bottom bar alignment across all joined shades
  • Ultra-quiet, low drag coupler components

Installation

  • Measuring template ensures precise and easy installation. Plastic angled coupler templates can be ordered through Customer Service:
    0°-15° Narrow Angle Coupler Template (P/N 045-315)
    0°-45° Wide Angle Coupler Template (P/N 045-318)
  • Offers “phase adjustment” which allows for bottom bars to be aligned after installation
  • Minimum width
    Drive side panel: 25.5 in (648 mm)
    Non-drive side panel: 14 in (456 mm)
  • Ceiling and pocket-mount capable

               
 
Back to top

In-line Coupler
Installing one shade drive to operate multiple fabric panels
creates a cost-effective solution without sacrificing automation or
daylight harvesting.

Performance

  • Operates up to six (6) coupled fabric panels using one (1) roller 100, roller 150 or roller 200CW drive
  • Maintains precise bottom bar alignment across all joined shades
  • Ultra-quiet, low drag coupler components

Installation
  • Assemble with any bracket configuration
  • Offers “phase adjustment” which allows for bottom bars to be aligned after installation
  • Simple Installation - no pins needed
  • 1.5 in. minimum light gap between shade panels
  • Minimum width
    Shade containing drive: 25.5 in (648 mm)
    Shades without drive: 14 in (456 mm)
Back to top

WIDR Tube
The WIDR (Width Integrated Deflection Reduction) tube option features an enhanced design with a larger and stronger cross-section. This improves shade aesthetics by minimizing deflection in wide windows of average height.

Performance

  • For use with all roller 100, roller 150 and roller 200CW drives
  • Decreases ripples on the fabric by reducing deflection in wide, single panel shade applications
  • Allows for shades up to 180 in. (4.6 m) wide and utilizes coupling systems for extra wide coupled shades
  • In some applications, the WIDR tube can remove the need for multiple shade panels, eliminating their associated light gaps
  • Maintains the quiet precision of Lutron electronic drive technology

Installation
Size
Tube diameter: 3.0 in (76 mm) (standard roller 100: 2.5 in)
Standard pocket size: 4.75 in x 5.00 in (121 mm x 127 mm)
Typical shade size: 12 ft w x 8.33 ft h (about 100 ft2) (3.7 m x 2.5 m)

Mounting Options
Minimum bracket-to-bracket width: 24 in (610 mm)
Maximum bracket-to-bracket width: 15 ft (4.6 m)
Utilizes all roller 100 brackets and top treatments

The WIDR tube can also be used to structurally enhance
existing installations